The RMK AGRS Dealer Special knives #3, #6 and #9 are currently available for sale at the listed prices (other ones shown in photos, but not listed, are sold). All prices include shipping, tracking and insurance to the continental USA. Payment by check (must clear), money order or Paypal (F&F only).

All knives appear to be unused with original shop edge, and are in excellent to near mint condition (any condition issues are noted in individual listings below). The photos show the knives in numerical order from top (#1) to bottom (#9). See my notes under the RMK AGR Special thread for further configuration details on the various versions.

To purchase any of these, or if you'd like more photos or have any questions about any of these knives, PM me here or email me at rfcarlin@hotmail.com.

AGRS Type #3. 4 inch blade. Maple burl handle. Brass single hilt with brass and black spacers and brass butt cap. Numbered 009. Includes knife, Sullivan's brown leather sheath (with AGR Special stamping); dark line at sheath throat, and Fine India stone. One of a very limited edition of only 35 in this configuration. Tiny spot to RMK logo side of blade. $600

AGRS Type #6. 5 inch blade. Desert Ironwood handle. Brass single hilt with brass and black spacers and brass butt plate. Numbered 74. Includes knife, Sullivan's brown leather sheath (with AGR Special stamping), Fine India stone and original packaging (shop care sheet and butcher paper outer wrapper). Limited edition of 99. $550

AGRS Type #9. 4.5 inch blade. Ivorite handle with finger grips. Brass single hilt with brass and red spacers and thong hole. Not numbered (this is the first of the AGRS which are not numbered). Includes knife, Sullivan's black leather sheath (with AGR Special stamping and 4.5), plain salmon stone and original packaging (shop care sheet and butcher paper outer wrapper). Limited edition of 200. $700

Description/Historical Notes:
-Model: A.G. Russell Special
-Hunter/Skinner Knife
-Blade: 4, 4.5 or 5 inch lengths of 01 Swedish tool steel, .25 inch stock, in a modified drop point profile with a prominent spine swoop or hump about 2/3 of the way from hilt to tip. Thumb notches. Individual knife number etched to spine (between notches and swoop).
-Handle: Various materials: Sambar stag #1,4,5); leather (#2); Desert Ironwood (#6,7); Maple burl (#3); Ivorite (#8,9). Single hilt in brass or nickel silver. Various spacer configurations. Various butt configurations: compass (#1,4); butt cap (#2,3); butt plate (#5,6,7,8).
-Sheath: Randall (Sullivan’s) brown or black leather sheath. Reverse stamped with RMK logo and A.G. Russell in an arc above the RMK logo and Special in an arc below the RMK logo. Version #1 has AGRS stamped above logo on sheaths for the first 80 knives.
-Notes:
-Description from A.G. Russell website: Back in the 1990s, I designed a hunting knife for Randall to make just for A. G. Russell customers. We made the knife with a 4 inch blade, a 4.5 inch blade and a 5 inch blade. Most that we had made were with stag handles. We also produced a few with Maple Burl, Leather, and Desert Ironwood. In 2012, Randall made one hundred with a 4.5 inch blade of O-1 and a plain Ivorite handle. I really like the look of a finger grooved handle, and Randall does those so well. We have asked them to make a limited number with a 4.5 inch O-1 blade at 56-57 Rc with a finger grooved Ivorite handle. Ivorite is Randall's proprietary off-white phenolic handle material.
-The AG dealer special is the knife that has a blade design similar to the model 11 with a longer swoop (for lack of a better word) on the back side of the blade than you would see on catalog model 11's. They were made with various handle material, and blade lengths, as stated in the info Jesse posted above. The most recent were the ironwood handles with 5 inch and then 4 1/2 inch blade lengths. (Dale; posting on KTF)
-The AGRS has been released in three different blade lengths (4, 4.5 and 5 inch) and with a variety of handle materials. As of July, 2007, the 4 inch and 5 inch versions were no longer produced and only the 4.5 inch knife was available. Production numbers and availability dates for 4 and 5 inch knives listed below as per Jesse Egnew posting on KTF. Total production numbers (as per KTF): 4 inch blades (910); 5 inch blades (324); 4.5 inch blades (360+ as of 2018).
-AGRS Versions #1-8 were all numbered by A.G. Russell (not Randall); version #9 is the first that was not numbered. The numbers on versions #1-8 are etched on spine between thumb notches and blade swoop. As per Scott of RMK, AGR never requested that RMK etch the knives with the number.

Thanks,

Bob